ITEM MODEL: Exatron 900 Series...
Exatron 900 Series Automated IC and MEMS Testing Handler
This product is no longer in stock
Warning: Last items in stock!
ITEM MODEL: Exatron 904 SMT Pick&Place Handler for automated testing of semiconductor chips.
CONDITION: Used and fully working. The system has been tested to ensure the functionality of all the components. Please see the pictures, as well as the video below of us performing a test of the mechanical systems as well as some of the inputs and outputs.
The Exatron Model 900 Series Pick-and-Place Handler is an Automated Test Equipment (ATE) System designed for testing, programming, transfer, laser marking, and inspection of various package devices in JEDEC trays, waffle packs, and other inputs and outputs. It is a small-to-medium-volume, servo-motor based, engineering system that uses single trays, with a wide variety of inputs and outputs that can be configured for multiple sorting options. This Automated Handler is capable of handling all SMD and leaded device types and is a fast and flexible automated programming system built to meet the demands of small-to-medium volume production.
This system was used by a manufacturer of MEMS microphone products and has been configured with a custom test site for testing and handling of Microelectromechanical-Systems (MEMS) devices. The testing site has been equipped with Exatron’s own Diamond Particle Interconnect (PI) contactor sockets, designed for audio testing of MEMS microphones.
The system can be customized using Exatron standard building blocks as well as testing sockets from other suppliers, for various other MEMS and IC testing purposes:
Note that you can reach out directly to Exatron if you require any assistance setting up this system to suit your specific needs. Exatron has no time limit on their product support and guarantee to service their products even when not purchased directly from the manufacturer. Exatron also promises to always offer spare parts, service contacts, and rebuilds of any of their products.
|Number of test sites||Single site standard|
|Test Site||Single RF test site with quick-disconnect socket tooling plate|
|Test Socket||Supports nearly all OEM test sockets
Exatron custom built spring probe sockets
Exatron Particle Interconnect (PI) RF and CSP sockets
|Number of trays||Input: 1
|Types of input/output trays||JEDEC - fits all formats, 2" and 4" waffle packs
Options: tape, tube, bulk, bowl feeder, magazine
|Test interface / Communications Standards||TTL Handler port, RS-232, GPIB, TCP/IP, Ethernet, SECS/GEM|
|Products/Device Types handled||SMD and leaded device types:
BGA, CSP, DIP, Flat Pack, LCC, LGA, MSOP, PCB, PGA, PLCC, QFP, SIMM, SIP, SIMM, SODIMM, SOIC, SSOIC, TSSOP, and custom devices
|Pick up head||Z-axis pickup head with vacuum nozzle on Y-axis gantry|
|Air Pressure Required||80 psi clean dry, air at 2 CFM (typical, add 1.5 CFM per each venutri added)|
|Device Size||1.6x2.00mm to 75x75mm|
|Number of pick-up heads / Z cars||2 Dual pickup heads - 16 pickup tips each|
|Number of Test/Program sites||16 / Loads 2 groups of 8 devices each|
|Test capacity||16 devices every 8 seconds|
|Tri-temp IC Test Option||Can be integrated into the system - contact Exatron|
|X-Y drive system||Servo motor-driven lead screws|
|X-Y Axis Resolution||0.002” (0.05mm)|
|X-Y Axis Max. Velocity||48”/sec (122cm/s)|
|Z Drive System||Servo motor-driven lead screws|
|Z Axis Resolution / Placement Accuracy||+/- 0.002” (0.05mm)|
|Z Axis Repeatability / Placement Repeatability||+/- 0.002” (0.05mm)|
|Placement Force||Up to 10kg (20 lbs) force with standard pickup heads|
|Theta Drive System||Precision stepper motor driven|
|Theta Axis Resolution||0.1°|
|Theta Axis Repeatability||+/- 0.1mm (0.003")|
THIS LISTING COMES WITH
We inspect and test every piece of equipment we sell, and we capture the testing process in our pictures and videos. This usually provides our clients with the assurance that they need.
If you are interested in a particular piece of equipment, and would like to see the results of additional tests that we have not performed, we offer the following services:
After your equipment purchase, if you are not completely satisfied, our Guarantee offers you a 30 day return period. During this period, you may return the equipment to us with no questions asked, we only ask that you cover return shipping costs and a 20% restocking fee on our invoice price.
Please contact us by phone or e-mail if you have any questions.